 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PAA193 Dual Pole OptoMOS(R) Relays Blocking Voltage Load Current Max RON PAA193 600 100 50 Units V mA Features * 5000VRMS Input/Output Isolation * Small 8 Pin DIP Package * Low Drive Power Requirements (TTL/CMOS Compatible) * No Moving Parts * High Reliability * Arc-Free With No Snubbing Circuits * No EMI/RFI Generation * Machine Insertable, Wave Solderable * Surface Mount and Tape & Reel Versions Available Description The PAA193 is a Dual 1-Form-A solid state relay that uses optically coupled relay technology for the two independent relays to provide an enhanced 5000VRMS isolation barrier between the input and output of the relay. The efficient MOSFET switches use Clares patented OptoMOS architecture. Each optically coupled input is controlled by a highly efficient GaAIAs infrared LED. Dual OptoMOS relays provide a more compact design solution than discrete single pole relays in a variety of applications. The dual relays save board space by incorporating both in a single 8-pin package. Applications * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment-Patient/Equipment Isolation * Security * Aerospace * Industrial Controls Approvals * UL Approved to UL1577 * CSA Certified * Complies with: EN 60950 Ordering Information Part # PAA193 PAA193S PAA193STR Description 8 Pin DIP (50/Tube) 8 Pin Surface Mount (50/Tube) 8 Pin Surface Mount (1000/Reel) Pin Configuration PAA193 Pinout + Control - Switch #1 1 8 7 6 5 Load - Switch #1 Load - Switch #1 Load - Switch #2 Load - Switch #2 2 -- Control - Switch #1 3 + Control - Switch #2 4 -- Control - Switch #2 Switching Characteristics of Normally Open (Form A) Devices 10ms CONTROL + 90% LOAD 10% + 10%+ TON TOFF DS-PAA193-R01.0 www.clare.com 1 PAA193 Absolute Maximum Ratings (@ 25 C) Parameter Input Power Dissipation Input Control Current Peak (10ms) Reverse Input Voltage Blocking Voltage Total Power Dissipation Isolation Voltage Input to Output (60 seconds) Operational Temperature Storage Temperature Soldering Temperature DIP Package (10 Seconds Max.) Surface Mount Package 1 2 Ratings 1501 50 1 5 600 8002 5000 -40 to +85 -40 to +125 +260 +220 Units mW mA A V V mW VRMS C C C C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Derate Linearly 1.33 mw/C Derate Linearly 6.67 mw/C Electrical Characteristics Parameter Output Characteristics @ 25C Load Current* (Continuous) Peak Load Current On-Resistance Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics @ 25C Input Control Current Input Voltage Drop Reverse Input Current Input Characteristics @ 25C Input to Output Capacitance Conditions 10ms IL=100mA VL=600V IF=5mA, VL=10V IF=5mA, VL=10V 50V; f=1MHz IL= 100mA IF= 5mA VR=5V Symbol IL ILPK RON ILEAK TON TOFF COUT IF VF IR CI/O Min 5 0.9 Typ 50 1.2 3 Max 100 350 50 10 5 5 1.4 10 Units mA mA A ms ms pF mA V A pF *NOTE: If both poles operate simultaneously load current must be derated so as not to exceed the package power dissipation value. 2 www.clare.com R01.0 PAA193 PERFORMANCE DATA* 35 30 35 30 Device Count (N) 35 30 Device Count (N) Device Count (N) 25 20 15 10 5 0 1.25 1.26 1.27 1.28 1.29 1.30 LED Forward Voltage Drop (V) 25 20 15 10 5 0 34.3 34.6 34.9 35.2 35.5 35.8 36.1 25 20 15 10 5 0 777 782 787 792 797 802 807 Blocking Voltage (V) ) 25 20 15 10 5 0 0.39 0.65 0.91 1.17 1.43 1.69 1.95 LED Current (mA) 25 20 15 10 5 0 0.39 0.65 0.91 1.17 1.43 1.69 ) 25 20 15 10 5 0 Device Count (N) Device Count (N) Device Count (N) 1.95 0.64 0.68 0.72 0.76 0.80 0.88 0.92 LED Current (mA) Turn-On (ms) PAA193 Typical Load Current vs. Temperature 35 30 180 160 PAA193 Typical Leakage vs. Temperature (Measured across Pins 5 & 6 or 7 & 8) 0.040 0.035 Load Current (mA) Device Count (N) 140 120 100 80 60 40 20 0 25 20 15 10 5 0 0.20 0.22 0.24 0.26 0.28 0.30 Turn-Off (ms) Single Pole Operation IF = 5mA IF = 5mA 0.030 0.025 0.020 0.015 0.010 0.005 Two Pole Operation -40 -20 0 20 40 60 80 100 120 0.000 -40 -20 0 20 40 60 80 100 PAA193 Typical Blocking Voltage vs. Temperature 950 Blocking Voltage (V) PAA193 Typical Turn-On vs. Temperature (Load Current = 50mADC) 5.000 4.500 4.000 3.500 3.000 2.500 2.000 1.500 1.000 0.500 0 -40 -20 0 20 40 60 1.000 0.900 0.800 0.700 0.600 0.500 0.400 0.300 0.200 0.100 0 -40 PAA193 Typical Turn-Off vs. Temperature (Load Current = 50mADC) 900 Turn-On (ms) 800 750 700 650 600 -40 -20 0 20 40 60 80 100 IF = 5mA Turn-Off (ms) 850 IF = 5mA IF = 10mA 80 100 -20 0 20 40 60 80 100 *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R01.0 www.clare.com 3 PAA193 PERFORMANCE DATA* PAA193 Typical LED Forward Voltage Drop vs. Temperature LED Forward Voltage Drop (V) 1.8 1.6 Turn-On (ms) PAA193 Typical Turn-On vs. LED Forward Current (Load Current = 50mADC) 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 0 5 10 15 20 25 30 35 40 45 50 LED Forward Current (mA) PAA193 Typical Turn-Off vs. LED Forward Current (Load Current = 50mADC) 0.7 0.6 Turn-Off (ms) 1.4 1.2 1.0 0.8 -40 -20 0 20 40 60 IF = 50mA 0.5 0.4 0.3 0.2 0.1 0 0 5 10 15 20 25 30 35 40 45 50 LED Forward Current (mA) IF = 10mA IF = 5mA 80 100 120 PAA193 Typical On-Resistance vs. Temperature (Load Current = Max Rated at Temperature) 140 120 100 80 60 40 Single Pole Operating 20 -40 -20 0 20 40 60 80 100 Two Poles Operating IF = 5mA PAA193 Typical On-Resistance vs. Temperature (Load current = 50mADC Instantaneous) 80 60 LED Current (mA) PAA193 Typical IF for Switch Operation vs. Temperature (Load Current = 50mADC) 3.000 2.500 2.000 1.500 1.000 0.500 50 40 IF = 5mA IF = 5mA 30 20 10 0 -40 -20 0 20 40 60 80 100 0.000 -40 -20 0 20 40 60 80 100 PAA193 Typical IF for Switch Dropout vs. Temperature (Load Current = 50mADC) 3.0 LED Current (mA) Load Current (mA) 150 100 50 0 -50 -100 -150 -6 -4 -2 0 2 4 6 PAA193 Energy Rating Curve 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 10s 2.5 2.0 1.5 1.0 0.5 0 -40 -20 0 20 40 60 80 100 Load Current (A) 100s 1ms 10ms 100ms Time 1s 10s 100s Output Voltage Drop (V) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com R01.0 MECHANICAL DIMENSIONS 8 Pin DIP Through Hole (Standard) PC Board Pattern (Top View) 8-.800 DIA. (8-.031 DIA.) 7.239 TYP. (0.285) 3.302 (0.130) 9.144 TYP. (0.360) 8 Pin DIP Surface Mount (S Suffix) PC Board Pattern (Top View) 3.302 (0.130) 0.635 TYP. (0.025) 0.254 TYP. (0.010) Tape and Reel Packaging for 8 Pin Surface Mount Package 330.2 DIA. (13.00) Top Cover Tape Thickness 0.102 MAX. (0.004) 6.731 MAX. (0.265) 0.406 MAX. (0.016) 1 8 10.300 (0.405) 12.090 (0.476) 4.877 (0.192) Embossed Carrier Top Cover Tape 0.050R TYP. Embossment User Direction of Feed Dimensions mm (inches) For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare's Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-PAA193-R01.0 (c)Copyright 2003, Clare, Inc. OptoMOS(R) is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 9/12/03 |
Price & Availability of PAA193
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |